English
Arabic
Overview
The new TDLS8000 houses all of the industry’s leading features in one robust device. The platform design is for in situ measurements, eliminating the need for sample extraction and conditioning. The non-contacting sensor allows for a variety of process types including corrosive, abrasive, and condensing.
The first generation platform has been proven in many others for the measurements of O2, CO, CH4, NH3, H2O and many more NIR absorbing gases. This second generation platform has improved reliability and ease of installation and maintenance while still meeting or exceeding designed application demands.
Analyzer that realizes real-time feedback and adds value to users through active use such as process control and safety control
* Energy-efficient furnaces, etc., and safety and stable operation contribute to improving OPEX and reducing environmental impact.
* Rapid feedback of process output to the control program, which is essential for optimal operation.
* Release of cumbersome sampling devices and drive components from maintenance.
* Realization of direct measurement under severe process conditions such as high temperature and corrosiveness.
* Energy-efficient furnaces, etc., and safety and stable operation contribute to improving OPEX and reducing environmental impact.
* Rapid feedback of process output to the control program, which is essential for optimal operation.
* Release of cumbersome sampling devices and drive components from maintenance.
* Realization of direct measurement under severe process conditions such as high temperature and corrosiveness.
The TDLS8000 is an analyzer that can solve these problems.
The most trusted laser analyzer designed specifically to meet all of your requirements in one robust device that is easy to operate and maintain.
Features
SIL2 TruePeak combined with smart laser Technology
Intuitive touchscreen HMI
HART and Modbus TCP communications standard
8-stage auto-gain adapts to difficult applications
Fully field repairable with 50 days of data and spectra storage
Compact design for one-man installation without sacrificing ruggedness
Area classification Zone2/Div2 or Zone1/Div1
Benefits
* Measurement with a line using a laser does not miss dangerous thermal unevenness.
* By using a reference cell, low concentration gas is also measured with high accuracy.
* The optical path length can be measured up to 30 m and can be measured up to 1500℃ of hot gas.
* It can also be installed in dangerous places by acquiring Japanese explosion proof authentication, IECEx certification, ATEX
certification, FM (US, Canada), KOSHA certification, NEPSI certification, and EAC explosion proof certification.
* The sampling device is unnecessary, and it is easy to install because of its compact design.
* Non-contact type sensor without consumables, i.e. maintenance due to leakage or deterioration is unnecessary.
* It is possible to replace the parts on the spot while they are still installed during repair, and it is possible to reduce the
plant shutdown and repair costs due to downtime.
* By using a reference cell, low concentration gas is also measured with high accuracy.
* The optical path length can be measured up to 30 m and can be measured up to 1500℃ of hot gas.
* It can also be installed in dangerous places by acquiring Japanese explosion proof authentication, IECEx certification, ATEX
certification, FM (US, Canada), KOSHA certification, NEPSI certification, and EAC explosion proof certification.
* The sampling device is unnecessary, and it is easy to install because of its compact design.
* Non-contact type sensor without consumables, i.e. maintenance due to leakage or deterioration is unnecessary.
* It is possible to replace the parts on the spot while they are still installed during repair, and it is possible to reduce the
plant shutdown and repair costs due to downtime.
Specification
| Measurement object | O2, CO, CO or CH4, CO2, CO + CO2, H2O, NH3, NH3 + H2O, H2S, HCl concentration in combustion exhaust gas and process gas | |||
| Measurement system | Tunable diode laser spectroscopy | |||
| Measured components and range | Measured component | Min. range | Max. range | |
| O2 | 0-1% | 0-25% | ||
| CO(ppm) | 0-200 ppm | 0-10,000 ppm | ||
| CO+CH4 | CO | 0-200 ppm | 0-10,000 ppm | |
| CH4 | 0-5 % | |||
| NH3 | 0-30 ppm | 0-50,000 ppm | ||
| H2O (ppm) in non HC | 0-30 ppm | 0-30,000 ppm | ||
| H2O (ppm) in HC | 0-30 ppm | 0-30,000 ppm | ||
| CO (%) | 0-20 % | 0-50 % | ||
| CO (%) + CO2 (%) | 0-30 % | 0-100 % | ||
| NH3 + H2O | NH3 | 0-30 ppm | 0-5,000 ppm | |
| H2O | 0-5 % | 0-50 % | ||
| H2S | 0-5 % | 0-100 % | ||
| CO2 (%) High Range | 0-1 % | 0-5 % | ||
| CO2 (%) Extend.Range | 0-30 % | 0-50 % | ||
| H2O (%) | 0-10 % | 0-100 % | ||
| HCl | 0-50 ppm | 0-5,000 ppm | ||
| Output path length | Optical distance between the laser unit and the sensor control unit Standard; 0.5 to 6 m, Max; 30 m | |||
| Output signal | 2 points, 4 to 20 mA DC | |||
| Output types; Gas concentration, Transmission, Process gas temperature, Process gas pressure | ||||
| Output range; 3.0 to 21.6 mA DC | ||||
| Digital communication | HART, Ethernet | |||
| Contact outputs | 2 points, contact rating 24 V DC, 1 A | |||
| DO; | ||||
| Function: Activate during Warning / Calibration / Validation / Warm up / Maintenance conditions | ||||
| Fault; | ||||
| Function: Activate during normal condition, not activate during fault condition or when the system power is off | ||||
| Valve control output | 2 points | |||
| Function; Activate calibration or validation solenoid valves for zero, span or validation gas | ||||
| Output signal; 24 V DC, 500 mA Max. per terminal | ||||
| Alarm | Warning; | |||
| Gas concentration low/high, Transmission low, Process pressure low/high, Process temperature low/high, Validation required, Validation failure, Zero/Span calibration error, Non process alarm, External alarm | ||||
| Fault; | ||||
| Laser module temperature low/high, Laser temperature low/high, Detector signal high, Peak center out of range, Reference peak height low, Absorption too high, Transmission lost, Reference transmission low, Reference peak height high, Laser unit failure, Laser module error, File access error, E2PROM access error. | ||||
| Contact inputs | 2 points | |||
| (Digital input) | Function; | |||
| External alarm/Calibration start/Validation start/Stream switch | ||||
| Contact specification; | ||||
| Zero voltage contact input | ||||
| Input signal; Open signal; | ||||
| 100 kΩ or more, Close signal; 200 Ω or less | ||||
| Input signal | 2 points, 4 to 24 mA DC | |||
| (Analog input) | Input types; Process gas temperature, Process gas pressure | |||
| Self-diagnostics | Laser Unit temperature, Sensor Control Unit temperature, Laser temperature, Detector signal level, Memory read/write function, Peak locking condition | |||
| Calibration | Calibration method; Zero/Span calibration | |||
| Calibration mode; Manual, Auto, Local initiate (HMI) | ||||
| Validation | Validation method; Up to 2 points | |||
| Validation mode; Manual, Auto, Local initiate (HMI) | ||||
| Power supply | 24 V DC ±10% | |||
| Warm-up time | 5 min. | |||
| Protection degree | IP66, NEMA Type 4X | |||
| Hazardous area classifications | Division 1, Zone 1; Explosion-proof/ Flame-proof type; FM, cFM, ATEX, IECEx (Pending) | |||
| Division 2, Zone 2; Non-Incendive/Type n; FM, cFM, ATEX, IECEx | ||||
| Process gas condition | Process gas temperature; Maximum 1500℃ | |||
| Process gas pressure; Max. 1 MPa, Min. 90 kPa | ||||
| Dust in process gas; 20 g/m3 or less | ||||
| Installation condition | Ambient operating temperature; -20 to 55℃ | |||
| Storage temperature; -30 to 70℃ | ||||
| Humidity; 0 to 95%RH at 40℃ (Non-condensing) | ||||
| Mounting flange type; ASME B 16.5, DIN, JIS | ||||
| Gas connections; 1/4 NPT or Rc1/4 | ||||
| Purge gas; | ||||
| Recommended purge gasses | ||||
| O2 analyzer; N2 (99.99% or greater, application dependent) | ||||
| H2O ppm analyzer; N2 (99.99% or greater with < 20 ppm H2O for feed to the optional dryer package) | ||||
| CO, CO or CH4, CO2, CO+CO2, NH3, NH3+H2O, H2S, HCl; | ||||
| N2 (99.99% or greater, application dependent) or Instrument air CO, NH3 analyzer: N2 (99.99% or greater, application dependent) or Instrument air | ||||
| Purge gas flow rates; | ||||
| 5-20 L/min for optic | ||||
| 5-30 L/min for process window | ||||
| Purge gas connections; | ||||
| 1/4NPT (-G1, -C2, -D2, -C2, -D1, -C1), | ||||
| Rc1/4 (-G2, -S2, -E2, -J2, -E1, -J1) | ||||
please contact email for more about the shipping cost
We normally ship by DHL, UPS, FEDEX or TNT,
some country could not be ship by above method, then we would use EMS or Country Logistics line.
We normally ship by DHL, UPS, FEDEX or TNT,
some country could not be ship by above method, then we would use EMS or Country Logistics line.
Chat with Us
